[chirp_devel] Build test results: Still Failing

[Build System]

Tested changes:

[Dan Smith <dsmith at danplanet.com>] Remove unnecessary test tools

After #5237 these are no longer necessary and duplicative.

[Dan Smith <dsmith at danplanet.com>] Add tox.ini for running tests

Tox handles venv creation and management of setup install for
running tests. Since we have a venv required already, this just
makes sense.

Now, instead of:

 ./run_all_tests.sh

You can just run:

  tox

Assuming you have tox installed (pip install tox). You can run individual
test groups like this:

 tox -e unit
 tox -e driver

and still pass arguments to the driver tests per usual with:

 tox -e driver -- -d Icom_IC-2200H

I'll be working to make the build system use tox for running tests with
better isolation and hopefully more repeatability.

#5237

[Dan Smith <dsmith at danplanet.com>] Some fixes to run_tests

First, in r2787 we made the BruteForce test do RadioFeatures validation on
a memory, avoiding a failure if the memory did not validate. For some reason
we still required that radio.validate_memory() pass for any of those tests,
which doesn't allow for the radio to ban quirks in the tests. This makes us
not fail if the radio rightly fails to validate.

Second, we were modifying the memory in do_mode() so that once we passed FM
in the mode sequence we were always trying freq+100Mhz. Depending on how we
ran the tests (i.e. which order we hit the modes) this would sometimes fail.
This makes us copy the original memory so we're stable throughout the modes.

Related to #5237

[Dan Smith <dsmith at danplanet.com>] [icq7] Add validate_memory() for sub-30MHz AM requirement

This driver has a requirement that anything under 30MHz be AM. Validate that
in validate_memory() so we can properly handle cases where that won't work.

Found in the pursuit of #5237

[Dan Smith <dsmith at danplanet.com>] Remove dedicated silly rptbuild setup handler

This just makes setup.py more complicated and there's no reason to build
this as a separate package. Just build it as an additional script on the
main default build.

Needed for #5237

[Dan Smith <dsmith at danplanet.com>] Let make_supported.py take an output filename as the first argument

Needed for #5237

[Dan Smith <dsmith at danplanet.com>] More pep8 compliance fixes

#2355

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145



Full log:

Started by an SCM change
Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace
[workspace] $ hg showconfig paths.default
[workspace] $ hg pull --rev default
[workspace] $ hg update --clean --rev default
7 files updated, 0 files merged, 2 files removed, 0 files unresolved
[workspace] $ hg log --rev . --template {node}
[workspace] $ hg log --rev . --template {rev}
[workspace] $ hg log --rev 9b7e86dfaf1bb7fc697b99e94a744fb136ad536d
[workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 9b7e86dfaf1bb7fc697b99e94a744fb136ad536d
No emails were triggered.
[workspace] $ /bin/sh -xe /tmp/hudson2210702522770226416.sh
[workspace] $ /bin/sh -xe /tmp/hudson5692053982839956029.sh
+ PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh
/tmp/hudson5692053982839956029.sh: 2: /tmp/hudson5692053982839956029.sh: ./run_all_tests.sh: not found
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure