[chirp_devel] Question about FT-1D v FT2D

[Keith Klamm]

Chirp/Python development on Mac OS (Sierra) is not intuitive to me so a quick start guide, tips and tricks, would be much appreciated. It has been a while but I recall having issues with libxml2 and pygtk. I did not get very far. Thanks!

Keith

> On Jun 24, 2017, at 9:11 PM, NNN Wx via chirp_devel <chirp_devel at intrepid.danplanet.com> wrote:
> 
> I used the label-encoding code straight from the ftm3200d. It worked correctly right off the bat. (so far, I’ve commented away the rest of the 3200d code.)
> Thanks, Wade.
> 
> Now for the memory banks: those data are at a different offset than in the FT-1D.
> 
> BTW, I’ve also got development working directly in Mac OS X. I plan to write up the few things I needed to do so it can be included in the OS X-centric instructions on the development site (unless others have already done so or if it’s intuitively obvious to the rest of the world.)
> 
>> On Jun 24, 2017, at 19:45, Wade Simmons <wade at wades.im <mailto:wade at wades.im>> wrote:
>> 
>> Look at how the ftm3200d driver extends the FT1D one and uses ascii for encoding instead of the custom format the ft1d does. You can probably do the same thing.
> 
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20170625/b06f5df9/attachment-0001.html