[chirp_devel] Build test results: Failure

[Build System]

Tested changes:

[Ray Cielencki <rayslinky at gmail.com>] [VX-3] fix bank_used issue #1203

This patch works around #1203 -- where banks are not properly marked as
used. Additionally, it corrects how bank_used values are calculated.

[SASANO Takayoshi <uaa at mx5.nisiq.net>] Bug#4771, add high-speed (38400bps) cloning to IC-P7

[SASANO Takayoshi <uaa at mx5.nisiq.net>] Bug #4769
remove meaningless _mem.set_raw("\x00" * (_mem.size() / 8)) line,
all elements are filled when setting/emptying entry.

[Richard Birch <n7uoa.birch at gmail.com>] [vx5] Corrected checksum and added prompts Fixes #4749

[Dan Smith <dsmith at danplanet.com>] Add Rugged RH5R G2

#0

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145



Full log:

Started by an SCM change
Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace
[workspace] $ hg showconfig paths.default
[workspace] $ hg pull --rev default
[workspace] $ hg update --clean --rev default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
[workspace] $ hg log --rev . --template {node}
[workspace] $ hg log --rev . --template {rev}
[workspace] $ hg log --rev 7fe5f7b14be57479d4d37c9e204caf6a076b5d18
[workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 7fe5f7b14be57479d4d37c9e204caf6a076b5d18
No emails were triggered.
[workspace] $ /bin/sh -xe /tmp/hudson3045486650759912958.sh
[workspace] $ /bin/sh -xe /tmp/hudson8467155497089852769.sh
+ PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh
test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok
test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok
test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok
test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok
test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok
test_init (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok
test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok
test_changed (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok
test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok
test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok

----------------------------------------------------------------------
Ran 151 tests in 0.053s

OK
Patch 'tip' is OK
Checking for PEP8 regressions...
./chirp/drivers/icf.py:202:26: E261 at least two spaces before inline comment
./chirp/drivers/icf.py:266:30: E261 at least two spaces before inline comment
./chirp/platform.py:255:80: E501 line too long (82 > 79 characters)
./chirp/ui/mainapp.py:1909:80: E501 line too long (82 > 79 characters)
./chirp/ui/mainapp.py:1965:80: E501 line too long (82 > 79 characters)

real	0m7.678s
user	0m7.556s
sys	0m0.032s
================================================
Tests FAILED: driver tests
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure