[chirp_devel] help needed

[Nathan Crapo]

I had this issue recently and it was a file permissions issue on
/dev/ttyUSB0.  Make sure you have write permission.

-Nathan


On Tue, May 10, 2016 at 12:53 PM, Tom Masterson via chirp_devel <
chirp_devel at intrepid.danplanet.com> wrote:

> I am working with several radios some of which I expect not to work so no
> problem.  However if I hook up a Baofeng UV-6 and ask chirp to do a
> download via ttyUSB0 under Ubuntu 14.04 I get "Radio did not respond"
> error.  Nothing else shows in the log even if I use debug level and
> verbose settings.
>
> Radio connected with it's proper cable and volume on full (though I have
> tested it at various volume settings).  I get the expected errors if the
> cable is not plugged into the computer so I assume it is reading the port
> correctly.
>
> Any suggestions on what I may be doing wrong?
>
> Thanks
> Tom
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20160510/ccd7062b/attachment-0001.html