[chirp_devel] BTECH IO comments about the patches.

[M.Sc. Pavel Milanes Costa]

Hi Jim and all, see below

El 28/03/16 a las 20:48, Jim Unroe escribió:
> Pavel,
>
> I tested with all 5 of the radios in my possession. After increasing
> the SERIAL_TIMEOUT to 0.68, here are the failures.
>
> UV-2501+220 will not upload under Linux or Windows. Changing the
> timeout value makes not difference that I can see.

I think I found the bug, reviewing the serial logs I found that the 
2501+220 does a extra step before the upload of the first block and just 
after the second ID, I will work on that direction.

Funny, it's just on the upload process.

> Mini-8900 will not download under Linux. Changing the timeout value
> makes no difference that I can see.

This is the same problem I found earlier, the radio does not give the 
bad ack on the dummy block, and this is inserted after the valid one in 
the first valid block read.

000: *06* *05* 58 00 00 40 00 25   ..X.. at .%

What keep me puzzled is that this only happen on Linux...

Jim, can you make two portmon serial log of a download in windows, first 
with the OEM and then with Chirp ?

Also activate the "debug = True" and send to me the debug.log that 
correspond to that Chirp download.

All this for the WACCOM Mini of course.

73 Pavel.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20160328/a6466be7/attachment-0001.html