[chirp_devel] Build test results: Failure

[Build System]

Tested changes:

[Jim Unroe <rock.unroe at gmail.com>] PEP8 cleanup for Alinco driver

This patch resolves the issues that are causing the Alinco driver
to be flagged as needing a bit of PEP8 cleanup.

#4315

[Jim Unroe <rock.unroe at gmail.com>] [NC-630A] Driver Cleanup

This cleans up some pep8 errors that I must have missed when testing.
There are otherwise no changes to the driver.

Related to #4235

[Jim Unroe <rock.unroe at gmail.com>] [RT1] Add Support for Retevis RT1

This patch adds CHIRP support for programming both the
VHF and UHF models of the Retevis RT1 handheld radios.

#4313

[Jim Unroe <rock.unroe at gmail.com>] [RT21] Add PF1 Function Key Setting

This patch adds the ability to set the PF1 key function of the Retevis RT21.

#4139

[Jim Unroe <rock.unroe at gmail.com>] [RT22] Add Support for Luiton LT-316

This patch adds support for the Luiton LT-316 variant to the
retevis_rt22.py driver.

Related to #4145

[Jim Unroe <rock.unroe at gmail.com>] [RT22] Add Retries When Initializing Cloning

Cloning does not always begin on the initial request. This patch
adds the ability to retry up to five times (similar to how the
factory software does it).

Related to #4145

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145



Full log:

Started by an SCM change
Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace
[workspace] $ hg showconfig paths.default
[workspace] $ hg pull --rev default
[workspace] $ hg update --clean --rev default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
[workspace] $ hg log --rev . --template {node}
[workspace] $ hg log --rev . --template {rev}
[workspace] $ hg log --rev b6d25de71e0feb5aed26105b5d5d8edddfcb8b66
[workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune b6d25de71e0feb5aed26105b5d5d8edddfcb8b66
No emails were triggered.
[workspace] $ /bin/sh -xe /tmp/hudson1782236536931155665.sh
[workspace] $ /bin/sh -xe /tmp/hudson1109123365650242956.sh
+ PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh
test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok
test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok
test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok
test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok
test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok
test_init (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok
test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok
test_changed (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok
test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok
test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok

----------------------------------------------------------------------
Ran 151 tests in 0.052s

OK
Patch 'tip' is OK
Checking for PEP8 regressions...

real	0m7.644s
user	0m7.564s
sys	0m0.016s
================================================
Tests FAILED: make supported
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure