[chirp_devel] Build test results: Failure

[Build System]

Tested changes:

[Zach Welch <zach at mandolincreekfarm.com>] Allow run_tests to be run from anywhere (#2343)

Find the path to run_tests, then chdir into the tests directory.

[Zach Welch <zach at mandolincreekfarm.com>] Fix style issues in setup.py (#2355)

This patch brings setup.py into conformance with PEP8 rules and removes
it from the blacklist.   It also rewrites the staticify_chirp_module
routine to be more idiomatic.

[Zach Welch <zach at mandolincreekfarm.com>] Fix style issues (4/4) (#2355)

More low-hanging style issues.

[Zach Welch <zach at mandolincreekfarm.com>] Fix style issues (3/4) (#2355)

This patch fixes more low-hanging style issues.  For the most part,
these are all whitespace changes, but there were a handful of idiomatic
changes flagged by the pep8 tool too: "x.has_key(y)" is now "y in x".

[Zach Welch <zach at mandolincreekfarm.com>] Fix style issues (2/4) (#2355)

This patch fixes the style in a handful of files and removes them
from pep8.blacklist.

[Zach Welch <zach at mandolincreekfarm.com>] Fix style issues (1/4) (#2355)

This patch contains whitespace-only changes that eliminate all of the
PEP8 style warnings in the CLI and GUI scripts.

[Zach Welch <zach at mandolincreekfarm.com>] Add pep8 checker script (#2355)

This patch adds a new script that runs the pep8 tool on the CHIRP source
code files.  This script is intended to be included in the repository
pre-commit hook, preventing patches from causing style regressions.

The script checks a blacklist of files that are not yet compliant with
the style standards, and those files will not be scanned (unless -a is
given).   Since no new files should ever be added to the blacklist, it
should eventually shrink to empty, and the script will check the entire
codebase.

The blacklist makes it safe to begin using this tool immediately, so
this patch also adds a call to it from run_all_tests.sh.

[Zach Welch <zach at mandolincreekfarm.com>] Suppress startup debugging messages (#2347)

This patch changes the verbose startup messages to use LOG.info calls.
This change is required to make the CLI remotely usable, as it's
unreasonable to print so much information in that context.

I kept this separate from the last patch, because I can imagine that
this might impact the automated/buildbot testing.  To avoid regressions,
the previous output can be generated by setting 'CHIRP_DEBUG=info' in the
environment.

[Zach Welch <zach at mandolincreekfarm.com>] Use new logger module (#2347)

This patch chases down all references to CHIRP_DEBUG, converting the
wrapped print calls to LOG.debug calls.  It also eliminates a few plain
DEBUG variables and a couple of other one-off variants.

[Zach Welch <zach at mandolincreekfarm.com>] Fix chirp.logger module (#2347)

This patch addresses some issues with the chirp.logger module in order
to use it in chirpc and chirpw.  It prints the version string when
logging at DEBUG level.

In addition, it embraces and extends the "debug.log" support that was
present in chirpw, ensuring all log messages and output end up in that
file when running on Win32 or MacOS hosts.  It also allows that feature
to be tested on Linux by setting CHIRP_DEBUG_LOG in the environment.

[K. Arvanitis <kosta at alumni.uvic.ca>] [FT-60] Adding support for PMS channels.

Added special channel support for yasue programmable memory scan channels:
L1 - L50 and U1 - U50.

Bug #2367



Full log:

Started by an SCM change
Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace
[workspace] $ hg showconfig paths.default
[workspace] $ hg pull --rev default
[workspace] $ hg update --clean --rev default
76 files updated, 0 files merged, 0 files removed, 0 files unresolved
[workspace] $ hg log --rev . --template {node}
[workspace] $ hg log --rev . --template {rev}
[workspace] $ hg log --rev 93add44b17cb8a63116f0c7410f637a3b3e2223b
[workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 93add44b17cb8a63116f0c7410f637a3b3e2223b
No emails were triggered.
[workspace] $ /bin/sh -xe /tmp/hudson1561379177445625558.sh
+ ./run_all_tests.sh
test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok
test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok
test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok
test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok
test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok
test_init (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok
test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok
test_changed (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok
test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok
test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok

----------------------------------------------------------------------
Ran 151 tests in 0.060s

OK
Patch 'tip' is OK
Checking for PEP8 regressions...
1       E114 indentation is not a multiple of four (comment)
2       E115 expected an indented block (comment)
2       E116 unexpected indentation (comment)
13      E265 block comment should start with '# '
8       E402 module level import not at top of file
1       E713 test for membership should be 'not in'
2       E731 do not assign a lambda expression, use a def

real	0m2.447s
user	0m0.934s
sys	0m0.021s
================================================
Tests FAILED: pep8
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure