[chirp_devel] [PATCH] [Th9000] Adding devices file for new radio TYT TH9000D models #1035
David Fannin
Mon Apr 27 23:40:45 PDT 2015
# HG changeset patch
# User David Fannin <dfannin at sushisoft.com>
# Date 1430203203 25200
# Mon Apr 27 23:40:03 2015 -0700
# Node ID 237bb7557e557c689aa8d1863c40f2388b596974
# Parent 31a7494c324a347634c30cc3c9bded2ce83eeb21
[Th9000] Adding devices file for new radio TYT TH9000D models #1035
diff -r 31a7494c324a -r 237bb7557e55 chirp/drivers/th9000.py
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/chirp/drivers/th9000.py Mon Apr 27 23:40:03 2015 -0700
@@ -0,0 +1,839 @@
+# Copyright 2015 David Fannin KK6DF <kk6df at arrl.org>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+import os
+import struct
+import time
+import logging
+
+from chirp import bitwise
+from chirp import chirp_common
+from chirp import directory
+from chirp import errors
+from chirp import memmap
+from chirp import util
+from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \
+ RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \
+ RadioSettingValueInteger, RadioSettingValueString, \
+ RadioSettingValueFloat, InvalidValueError
+
+LOG = logging.getLogger(__name__)
+
+#
+# Chirp Driver for TYT TH-9000D (models: 2M (144 Mhz), 1.25M (220 Mhz) and 70cm (440 Mhz) radios)
+#
+# Version 1.0
+#
+# Note: Features not working:
+# - DCS , Cross Signaling
+# - Skip channels
+#
+# Global Parameters
+#
+MMAPSIZE = 16384
+TONES = [62.5] + list(chirp_common.TONES)
+TMODES = ['','Tone','DTCS']
+DUPLEXES = ['','err','-','+'] # index 2 not used
+MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw
+TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9
+POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65),
+ chirp_common.PowerLevel("Mid", watts=25),
+ chirp_common.PowerLevel("Low", watts=10)]
+
+CROSS_MODES = chirp_common.CROSS_MODES
+
+APO_LIST = [ "Off","30 min","1 hr","2 hrs" ]
+BGCOLOR_LIST = ["Blue","Orange","Purple"]
+BGBRIGHT_LIST = ["%s" % x for x in range(1,32)]
+SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)]
+TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)]
+TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting
+TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"]
+BEEP_LIST = ["Off","On"]
+
+SETTING_LISTS = {
+ "auto_power_off": APO_LIST,
+ "bg_color" : BGCOLOR_LIST,
+ "bg_brightness" : BGBRIGHT_LIST,
+ "squelch" : SQUELCH_LIST,
+ "timeout_timer" : TIMEOUT_LIST,
+ "choose_tx_power": TXPWR_LIST,
+ "tbst_freq" : TBSTFREQ_LIST,
+ "voice_prompt" : BEEP_LIST
+}
+
+MEM_FORMAT = """
+#seekto 0x0000;
+struct {
+ u8 unknown0000[16];
+ char idhdr[16];
+ u8 unknown0001[16];
+} fidhdr;
+"""
+#Overall Memory Map:
+#
+# Memory Map (Range 0x0100-3FF0, step 0x10):
+#
+# Field Start End Size
+# (hex) (hex) (hex)
+#
+# 1 Channel Set Flag 0100 011F 20
+# 2 Channel Skip Flag 0120 013F 20
+# 3 Blank/Unknown 0140 01EF B0
+# 4 Unknown 01F0 01FF 10
+# 5 TX/RX Range 0200 020F 10
+# 6 Bootup Passwd 0210 021F 10
+# 7 Options, Radio 0220 023F 20
+# 8 Unknown 0240 019F
+# 8B Startup Label 03E0 03E7 07
+# 9 Channel Bank 2000 38FF 1900
+# Channel 000 2000 201F 20
+# Channel 001 2020 202F 20
+# ...
+# Channel 199 38E0 38FF 20
+# 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792
+# Total Map Size 16128 (2^8 = 16384)
+#
+# TH9000/220 memory map
+# section: 1 and 2: Channel Set/Skip Flags
+#
+# Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active.
+# Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active.
+#
+# Both flag maps are a total 24 bytes in length, aligned on 32 byte records.
+# bit = 0 channel set/no skip, 1 is channel not set/skip
+#
+# to index a channel:
+# cbyte = channel / 8 ;
+# cbit = channel % 8 ;
+# setflag = csetflag[cbyte].c[cbit] ;
+# skipflag = cskipflag[cbyte].c[cbit] ;
+#
+# channel range is 0-199, range is 32 bytes (last 7 unknown)
+#
+MEM_FORMAT = MEM_FORMAT + """
+#seekto 0x0100;
+struct {
+ bit c[8];
+} csetflag[32];
+
+struct {
+ u8 unknown0100[7];
+} ropt0100;
+
+#seekto 0x0120;
+struct {
+ bit c[8];
+} cskipflag[32];
+
+struct {
+ u8 unknown0120[7];
+} ropt0120;
+"""
+# TH9000 memory map
+# section: 5 TX/RX Range
+# used to set the TX/RX range of the radio (e.g. 222-228Mhz for 220 meter)
+# possible to set range for tx/rx
+#
+MEM_FORMAT = MEM_FORMAT + """
+#seekto 0x0200;
+struct {
+ bbcd txrangelow[4];
+ bbcd txrangehi[4];
+ bbcd rxrangelow[4];
+ bbcd rxrangehi[4];
+} freqrange;
+"""
+# TH9000 memory map
+# section: 6 bootup_passwd
+# used to set bootup passwd (see boot_passwd checkbox option)
+#
+# options - bootup password
+#
+# bytes:bit type description
+# ---------------------------------------------------------------------------
+# 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set
+# 10 u8 unknown;
+#
+
+MEM_FORMAT = MEM_FORMAT + """
+#seekto 0x0210;
+struct {
+ u8 bootup_passwd[6];
+ u8 unknown2010[10];
+} ropt0210;
+"""
+# TH9000/220 memory map
+# section: 7 Radio Options
+# used to set a number of radio options
+#
+# bytes:bit type description
+# ---------------------------------------------------------------------------
+# 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr)
+# 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1
+# 1 u8 unknown;
+# 1 u8 squelch; squelch level, range 0-19, hex for menu
+# 1 u8 unknown[2];
+# 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0
+# 1 u8 unknown;
+# 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index
+# 1 u8 unknown;
+# 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2
+# 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz
+# 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout
+# 1 u8 unknown;
+# 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index
+# 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2
+#
+# description of function setup options, starting at 0x0230
+#
+# bytes:bit type description
+# ---------------------------------------------------------------------------
+# 1 u8 // 0
+# :4 unknown:6
+# :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked)
+# :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index
+# 2 u8 unknown[2] /1-2
+# 1 u8 // 3
+# :4 unknown:4
+# :1 inhibit_init_ops:1 //bit 5
+# :1 unknownD:1
+# :1 inhibit_setup_bg_chk:1 //bit 7
+# :1 unknown:1
+# 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4
+# 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5
+# 2 u8 unknown[2]; // 6-7
+# 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8
+# 7 u8 unknown[7]; // 9-F
+#
+MEM_FORMAT = MEM_FORMAT + """
+#seekto 0x0220;
+struct {
+ u8 display_mode;
+ u8 vfo_mr;
+ u8 unknown0220A;
+ u8 squelch;
+ u8 unknown0220B[2];
+ u8 channel_lock;
+ u8 unknown0220C;
+ u8 bg_brightness;
+ u8 unknown0220D;
+ u8 bg_color;
+ u8 tbst_freq;
+ u8 timeout_timer;
+ u8 unknown0220E;
+ u8 auto_power_off;
+ u8 voice_prompt;
+ u8 unknown0230A:6,
+ elim_sql_tail:1,
+ sql_key_function:1;
+ u8 unknown0230B[2];
+ u8 unknown0230C:4,
+ inhibit_init_ops:1,
+ unknown0230D:1,
+ inhibit_setup_bg_chk:1,
+ unknown0230E:1;
+ u8 tail_elim_type;
+ u8 choose_tx_power;
+ u8 unknown0230F[2];
+ u8 bootup_passwd_flag;
+ u8 unknown0230G[7];
+} settings;
+"""
+# TH9000 memory map
+# section: 8B Startup Label
+#
+# bytes:bit type description
+# ---------------------------------------------------------------------------
+# 7 char start_label[7] label displayed at startup (usually your call sign)
+#
+MEM_FORMAT = MEM_FORMAT + """
+#seekto 0x03E0;
+struct {
+ char startname[7];
+} slabel;
+"""
+# TH9000/220 memory map
+# section: 9 Channel Bank
+# description of channel bank (200 channels , range 0-199)
+# Each 32 Byte (0x20 hex) record:
+# bytes:bit type description
+# ---------------------------------------------------------------------------
+# 4 bbcd freq[4] receive frequency in packed binary coded decimal
+# 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field)
+# 1 u8
+# :4 unknown:4
+# :4 tuning_step:4 tuning step, menu index value from 0-9
+# 5,6.25,8.33,10,12.5,15,20,25,30,50
+# 1 u8
+# :4 unknown:4 not yet decoded, used for DCS coding?
+# :2 channel_width:2 channel spacing, menu index value from 0-3
+# 25,20,12.5
+# :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs)
+# :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit
+# 1 u8
+# :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater)
+# :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option)
+# :2 unknown:2
+# :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo
+# :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field)
+#
+# 1 u8
+# :4 unknown:4
+# :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone)
+# :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone)
+# 1 u8
+# :2 unknown:2
+# :6 txtone:6 tx ctcss tone, menu index
+# 1 u8
+# :2 unknown:2
+# :6 rxtone:6 rx ctcss tone, menu index
+# 1 u8 txcode ?, not used for ctcss
+# 1 u8 rxcode ?, not used for ctcss
+# 3 u8 unknown[3]
+# 7 char name[7] 7 byte char string for channel name
+# 1 u8
+# :6 unknown:6,
+# :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy)
+# 4 u8 unknownI[4];
+# 1 u8
+# :7 unknown:7
+# :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option)
+#
+MEM_FORMAT = MEM_FORMAT + """
+#seekto 0x2000;
+struct {
+ bbcd freq[4];
+ bbcd offset[4];
+ u8 unknown2000A:4,
+ tuning_step:4;
+ u8 unknown2000B:4,
+ channel_width:2,
+ reverse:1,
+ txoff:1;
+ u8 talkaround:1,
+ compander:1,
+ unknown2000C:2,
+ power:2,
+ duplex:2;
+ u8 unknown2000D:4,
+ rxtmode:2,
+ txtmode:2;
+ u8 unknown2000E:2,
+ txtone:6;
+ u8 unknown2000F:2,
+ rxtone:6;
+ u8 txcode;
+ u8 rxcode;
+ u8 unknown2000G[3];
+ char name[7];
+ u8 unknown2000H:6,
+ busychannellockout:2;
+ u8 unknown2000I[4];
+ u8 unknown2000J:7,
+ scrambler:1;
+} memory[200] ;
+"""
+
+def _echo_write(radio, data):
+ try:
+ radio.pipe.write(data)
+ radio.pipe.read(len(data))
+ except Exception, e:
+ LOG.error("Error writing to radio: %s" % e)
+ raise errors.RadioError("Unable to write to radio")
+
+
+def _checksum(data):
+ cs = 0
+ for byte in data:
+ cs += ord(byte)
+ return cs % 256
+
+def _read(radio, length):
+ try:
+ data = radio.pipe.read(length)
+ except Exception, e:
+ LOG.error( "Error reading from radio: %s" % e)
+ raise errors.RadioError("Unable to read from radio")
+
+ if len(data) != length:
+ LOG.error( "Short read from radio (%i, expected %i)" % (len(data),
+ length))
+ LOG.debug(util.hexprint(data))
+ raise errors.RadioError("Short read from radio")
+ return data
+
+
+
+def _ident(radio):
+ radio.pipe.setTimeout(1)
+ _echo_write(radio,"PROGRAM")
+ response = radio.pipe.read(3)
+ if response != "QX\06":
+ LOG.debug( "Response was :\n%s" % util.hexprint(response))
+ raise errors.RadioError("Unsupported model")
+ _echo_write(radio, "\x02")
+ response = radio.pipe.read(16)
+ LOG.debug(util.hexprint(response))
+ if response[1:8] != "TH-9000":
+ LOG.error( "Looking for:\n%s" % util.hexprint("TH-9000"))
+ LOG.error( "Response was:\n%s" % util.hexprint(response))
+ raise errors.RadioError("Unsupported model")
+
+def _send(radio, cmd, addr, length, data=None):
+ frame = struct.pack(">cHb", cmd, addr, length)
+ if data:
+ frame += data
+ frame += chr(_checksum(frame[1:]))
+ frame += "\x06"
+ _echo_write(radio, frame)
+ LOG.debug("Sent:\n%s" % util.hexprint(frame))
+ if data:
+ result = radio.pipe.read(1)
+ if result != "\x06":
+ LOG.debug( "Ack was: %s" % repr(result))
+ raise errors.RadioError("Radio did not accept block at %04x" % addr)
+ return
+ result = _read(radio, length + 6)
+ LOG.debug("Got:\n%s" % util.hexprint(result))
+ header = result[0:4]
+ data = result[4:-2]
+ ack = result[-1]
+ if ack != "\x06":
+ LOG.debug("Ack was: %s" % repr(ack))
+ raise errors.RadioError("Radio NAK'd block at %04x" % addr)
+ _cmd, _addr, _length = struct.unpack(">cHb", header)
+ if _addr != addr or _length != _length:
+ LOG.debug( "Expected/Received:")
+ LOG.debug(" Length: %02x/%02x" % (length, _length))
+ LOG.debug( " Addr: %04x/%04x" % (addr, _addr))
+ raise errors.RadioError("Radio send unexpected block")
+ cs = _checksum(result[1:-2])
+ if cs != ord(result[-2]):
+ LOG.debug( "Calculated: %02x" % cs)
+ LOG.debug( "Actual: %02x" % ord(result[-2]))
+ raise errors.RadioError("Block at 0x%04x failed checksum" % addr)
+ return data
+
+
+def _finish(radio):
+ endframe = "\x45\x4E\x44"
+ _echo_write(radio, endframe)
+ result = radio.pipe.read(1)
+ if result != "\x06":
+ LOG.error( "Got:\n%s" % util.hexprint(result))
+ raise errors.RadioError("Radio did not finish cleanly")
+
+def do_download(radio):
+
+ _ident(radio)
+
+ _memobj = None
+ data = ""
+
+ for start,end in radio._ranges:
+ for addr in range(start,end,0x10):
+ block = _send(radio,'R',addr,0x10)
+ data += block
+ status = chirp_common.Status()
+ status.cur = len(data)
+ status.max = end
+ status.msg = "Downloading from radio"
+ radio.status_fn(status)
+
+ _finish(radio)
+
+ return memmap.MemoryMap(data)
+
+def do_upload(radio):
+
+ _ident(radio)
+
+ for start,end in radio._ranges:
+ for addr in range(start,end,0x10):
+ if addr < 0x0100:
+ continue
+ block = radio._mmap[addr:addr+0x10]
+ _send(radio,'W',addr,len(block),block)
+ status = chirp_common.Status()
+ status.cur = addr
+ status.max = end
+ status.msg = "Uploading to Radio"
+ radio.status_fn(status)
+
+ _finish(radio)
+
+
+
+#
+# The base class, extended for use with other models
+#
+ at directory.register
+class Th9000Radio(chirp_common.CloneModeRadio,
+ chirp_common.ExperimentalRadio):
+ """TYT TH-9000"""
+ VENDOR = "TYT"
+ MODEL = "TH9000 Base"
+ BAUD_RATE = 9600
+ valid_freq = [(900000000, 999000000)]
+
+
+ _memsize = MMAPSIZE
+ _ranges = [(0x0000,0x4000)]
+
+ @classmethod
+ def get_prompts(cls):
+ rp = chirp_common.RadioPrompts()
+ rp.experimental = ("The TYT TH-9000 driver is an beta version."
+ "Proceed with Caution and backup your data")
+ return rp
+
+ def get_features(self):
+ rf = chirp_common.RadioFeatures()
+ rf.has_settings = True
+ rf.has_bank = False
+ rf.has_cross = True
+ rf.has_tuning_step = False
+ rf.has_rx_dtcs = True
+ rf.valid_skips = ["","S"]
+ rf.memory_bounds = (0, 199)
+ rf.valid_name_length = 7
+ rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-"
+ rf.valid_modes = MODES
+ rf.valid_tmodes = chirp_common.TONE_MODES
+ rf.valid_cross_modes = CROSS_MODES
+ rf.valid_power_levels = POWER_LEVELS
+ rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES
+ rf.valid_bands = self.valid_freq
+ return rf
+
+ # Do a download of the radio from the serial port
+ def sync_in(self):
+ self._mmap = do_download(self)
+ self.process_mmap()
+
+ # Do an upload of the radio to the serial port
+ def sync_out(self):
+ do_upload(self)
+
+ def process_mmap(self):
+ self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
+
+
+ # Return a raw representation of the memory object, which
+ # is very helpful for development
+ def get_raw_memory(self, number):
+ return repr(self._memobj.memory[number])
+
+ # not working yet
+ def _get_dcs_index(self, _mem,which):
+ base = getattr(_mem, '%scode' % which)
+ extra = getattr(_mem, '%sdcsextra' % which)
+ return (int(extra) << 8) | int(base)
+
+ def _set_dcs_index(self, _mem, which, index):
+ base = getattr(_mem, '%scode' % which)
+ extra = getattr(_mem, '%sdcsextra' % which)
+ base.set_value(index & 0xFF)
+ extra.set_value(index >> 8)
+
+
+ # Extract a high-level memory object from the low-level memory map
+ # This is called to populate a memory in the UI
+ def get_memory(self, number):
+ # Get a low-level memory object mapped to the image
+ _mem = self._memobj.memory[number]
+
+ # get flag info
+ cbyte = number / 8 ;
+ cbit = 7 - (number % 8) ;
+ setflag = self._memobj.csetflag[cbyte].c[cbit];
+ skipflag = self._memobj.cskipflag[cbyte].c[cbit];
+
+ mem = chirp_common.Memory()
+
+ mem.number = number # Set the memory number
+
+ if setflag == 1:
+ mem.empty = True
+ return mem
+
+ mem.freq = int(_mem.freq) * 100
+ mem.offset = int(_mem.offset) * 100
+ mem.name = str(_mem.name).rstrip() # Set the alpha tag
+ mem.duplex = DUPLEXES[_mem.duplex]
+ mem.mode = MODES[_mem.channel_width]
+ mem.power = POWER_LEVELS[_mem.power]
+
+ rxtone = txtone = None
+
+
+ rxmode = TMODES[_mem.rxtmode]
+ txmode = TMODES[_mem.txtmode]
+
+
+ rxpol = txpol = ""
+
+ # doesn't work
+ if rxmode == "Tone":
+ rxpol = ""
+ rxtone = TONES[_mem.rxtone]
+ elif rxmode == "DTCS":
+ rxpol = "N"
+ rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')]
+
+ if txmode == "Tone":
+ txpol = ""
+ txtone = TONES[_mem.txtone]
+ elif txmode == "DTCS":
+ txpol = "N"
+ txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')]
+
+
+ chirp_common.split_tone_decode(mem,
+ (txmode, txtone, txpol),
+ (rxmode, rxtone, rxpol))
+
+ mem.skip = "S" if skipflag == 1 else ""
+
+
+ # We'll consider any blank (i.e. 0MHz frequency) to be empty
+ if mem.freq == 0:
+ mem.empty = True
+
+ return mem
+
+ # Store details about a high-level memory to the memory map
+ # This is called when a user edits a memory in the UI
+ def set_memory(self, mem):
+ # Get a low-level memory object mapped to the image
+
+ _mem = self._memobj.memory[mem.number]
+
+ cbyte = mem.number / 8
+ cbit = 7 - (mem.number % 8)
+
+ if mem.empty:
+ self._memobj.csetflag[cbyte].c[cbit] = 1
+ self._memobj.cskipflag[cbyte].c[cbit] = 1
+ return
+
+ self._memobj.csetflag[cbyte].c[cbit] = 0
+ self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0
+
+ _mem.set_raw("\x00" * 32)
+
+ _mem.freq = mem.freq / 100 # Convert to low-level frequency
+ _mem.offset = mem.offset / 100 # Convert to low-level frequency
+
+ _mem.name = mem.name.ljust(7)[:7] # Store the alpha tag
+ _mem.duplex = DUPLEXES.index(mem.duplex)
+
+
+ try:
+ _mem.channel_width = MODES.index(mem.mode)
+ except ValueError:
+ _mem.channel_width = 0
+
+ ((txmode, txtone, txpol),
+ (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
+
+ _mem.txtmode = TMODES.index(txmode)
+ _mem.rxtmode = TMODES.index(rxmode)
+
+ if txmode == "Tone":
+ _mem.txtone = TONES.index(txtone)
+ elif txmode == "DTCS":
+ self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone))
+
+ if rxmode == "Tone":
+ _mem.rxtone = TONES.index(rxtone)
+ elif rxmode == "DTCS":
+ self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone))
+
+ #_mem.txinv = txpol == "N"
+ #_mem.rxinv = rxpol == "N"
+
+
+ if mem.power:
+ _mem.power = POWER_LEVELS.index(mem.power)
+ else:
+ _mem.power = 0
+
+ def _get_settings(self):
+ _settings = self._memobj.settings
+ _freqrange = self._memobj.freqrange
+ _slabel = self._memobj.slabel
+
+ basic = RadioSettingGroup("basic","Global Settings")
+ freqrange = RadioSettingGroup("freqrange","Frequency Ranges")
+ top = RadioSettingGroup("top","All Settings",basic,freqrange)
+ settings = RadioSettings(top)
+
+ def _filter(name):
+ filtered = ""
+ for char in str(name):
+ if char in chirp_common.CHARSET_ASCII:
+ filtered += char
+ else:
+ filtered += ""
+ return filtered
+
+ val = RadioSettingValueString(0,7,_filter(_slabel.startname))
+ rs = RadioSetting("startname","Startup Label",val)
+ basic.append(rs)
+
+ rs = RadioSetting("bg_color","LCD Color",
+ RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color]))
+ basic.append(rs)
+
+ rs = RadioSetting("bg_brightness","LCD Brightness",
+ RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness]))
+ basic.append(rs)
+
+ rs = RadioSetting("squelch","Squelch Level",
+ RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch]))
+ basic.append(rs)
+
+ rs = RadioSetting("timeout_timer","Timeout Timer (TOT)",
+ RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer]))
+ basic.append(rs)
+
+ rs = RadioSetting("auto_power_off","Auto Power Off (APO)",
+ RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off]))
+ basic.append(rs)
+
+ rs = RadioSetting("voice_prompt","Beep Prompt",
+ RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt]))
+ basic.append(rs)
+
+ rs = RadioSetting("tbst_freq","Tone Burst Frequency",
+ RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq]))
+ basic.append(rs)
+
+ rs = RadioSetting("choose_tx_power","Max Level of TX Power",
+ RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power]))
+ basic.append(rs)
+
+ (flow,fhigh) = self.valid_freq[0]
+ flow /= 1000
+ fhigh /= 1000
+ fmidrange = (fhigh- flow)/2
+
+ rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow,
+ flow + fmidrange,
+ int(_freqrange.txrangelow)/10))
+ freqrange.append(rs)
+
+ rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange,
+ fhigh,
+ int(_freqrange.txrangehi)/10))
+ freqrange.append(rs)
+
+ rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow,
+ flow+fmidrange,
+ int(_freqrange.rxrangelow)/10))
+ freqrange.append(rs)
+
+ rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange,
+ fhigh,
+ int(_freqrange.rxrangehi)/10))
+ freqrange.append(rs)
+
+ return settings
+
+ def get_settings(self):
+ try:
+ return self._get_settings()
+ except:
+ import traceback
+ LOG.error( "failed to parse settings")
+ traceback.print_exc()
+ return None
+
+ def set_settings(self,settings):
+ _settings = self._memobj.settings
+ for element in settings:
+ if not isinstance(element,RadioSetting):
+ self.set_settings(element)
+ continue
+ else:
+ try:
+ name = element.get_name()
+
+ if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]:
+ LOG.debug( "setting %s = %s" % (name,int(element.value)*10))
+ setattr(self._memobj.freqrange,name,int(element.value)*10)
+ continue
+
+ if name in ["startname"]:
+ LOG.debug( "setting %s = %s" % (name, element.value))
+ setattr(self._memobj.slabel,name,element.value)
+ continue
+
+ obj = _settings
+ setting = element.get_name()
+
+ if element.has_apply_callback():
+ LOG.debug( "using apply callback")
+ element.run_apply_callback()
+ else:
+ LOG.debug( "Setting %s = %s" % (setting, element.value))
+ setattr(obj, setting, element.value)
+ except Exception, e:
+ LOG.debug( element.get_name())
+ raise
+
+ @classmethod
+ def match_model(cls, filedata, filename):
+ if MMAPSIZE == len(filedata):
+ (flow,fhigh) = cls.valid_freq[0]
+ flow /= 1000000
+ fhigh /= 1000000
+
+ txmin=ord(filedata[0x200])*100 + (ord(filedata[0x201])>>4)*10 + ord(filedata[0x201])%16
+ txmax=ord(filedata[0x204])*100 + (ord(filedata[0x205])>>4)*10 + ord(filedata[0x205])%16
+ rxmin=ord(filedata[0x208])*100 + (ord(filedata[0x209])>>4)*10 + ord(filedata[0x209])%16
+ rxmax=ord(filedata[0x20C])*100 + (ord(filedata[0x20D])>>4)*10 + ord(filedata[0x20D])%16
+
+ if ( rxmin >= flow and rxmax <= fhigh and txmin >= flow and txmax <= fhigh ):
+ return True
+
+ return False
+
+ at directory.register
+class Th9000220Radio(Th9000Radio):
+ """TYT TH-9000 220"""
+ VENDOR = "TYT"
+ MODEL = "TH9000_220"
+ BAUD_RATE = 9600
+ valid_freq = [(220000000, 260000000)]
+
+ at directory.register
+class Th9000144Radio(Th9000220Radio):
+ """TYT TH-9000 144"""
+ VENDOR = "TYT"
+ MODEL = "TH9000_144"
+ BAUD_RATE = 9600
+ valid_freq = [(136000000, 174000000)]
+
+ at directory.register
+class Th9000440Radio(Th9000220Radio):
+ """TYT TH-9000 440"""
+ VENDOR = "TYT"
+ MODEL = "TH9000_440"
+ BAUD_RATE = 9600
+ valid_freq = [(400000000, 490000000)]
More information about the chirp_devel
mailing list