[chirp_devel] [PATCH] This is the latest experimential version for the TYT-TH9000D radio driver

[David Fannin]

Correct - I'll try out the approach that I outlined and included that in
the next patch, with the other fixes.



On Sat, Apr 25, 2015 at 7:30 AM, Dan Smith <dsmith at danplanet.com> wrote:

> > For the auto file identification, I was going to try looking at the
> > frequency ranges in the image file for identification.  These are
> > non-overlapping between the three models, and they are in a fixed
> > location in the image file.   Eg.   The 144 mhz models has a settable
> > tx/rx range between 132 and 152 Mhz (or close to this), the 220 Mhz
> > model has 200-250 mhz, etc.
> >
> > The file sizes are the same, AFAIK, for all three, so I can't use that
> > approach.  The image files don't have a consistent or usable "id string"
> > to help identity them ( I did a od/hex dump and reviewed what's there),
> > at least for the two radios ( 2 meter and 220 mhz models) that I have.
>
> Sure, I thought that you were indicating that you couldn't provide
> identification for this driver. Sounds like you should be able to use
> file size to rule all the other models out and use band limits to
> distinguish within the 9000 line among the sub-models, right?
>
> Thanks!
>
> --Dan
>
>
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20150425/d5010451/attachment-0001.html