[chirp_devel] Wouxun Mobile Radios

[Jim Unroe]

I know that everyone is probably very busy. This is just to let you all
know that I am still trying to figure out what I need to do next. If these
radios are similar to something that has already been done, then I don't
see it (yet).

Thanks,
Jim KC9HI


On Tue, May 6, 2014 at 12:55 PM, Marco IZ3GME <iz3gme.marco at gmail.com>wrote:

> Sorry Jim, I promise I'll look at them in a few days ...
>
> 73 de IZ3GME Marco
>
> On 05/06/2014 12:32 PM, Jim Unroe wrote:
> > Bump. Anyone with some advice? Do these logs look similar to any radios
> > that are already supported. Any help to get me started will be
> appreciated.
> >
> > Jim KC9HI
> >
> >
> > On Fri, Apr 25, 2014 at 8:51 PM, Jim Unroe <rock.unroe at gmail.com
> > <mailto:rock.unroe at gmail.com>> wrote:
> >
> >     All,
> >
> >     I got my hands on some Wouxun mobile radios that I thought I would
> >     see if I could develop support for. Specifically the KG-UV920P-A
> >     dual band mobile and the KG-UV950P quad band mobile.
> >
> >     I thought when I captured the serial port of a download using
> >     PortMon, I would see something similar to what I was used to working
> >     with handi-talkies. Well that wasn't the case.
> >
> >     So I have attached the logs from both radios in the hope that a few
> >     might be able to assist me (or at least guide me) with getting
> >     started. Thanks in advance.
> >
> >     Jim KC9HI
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20140527/71a87ec3/attachment-0001.html