[chirp_devel] Baofeng UV-6 Radio

[Jim Unroe]

On Fri, Jan 31, 2014 at 9:43 AM, Dan Smith <dsmith at danplanet.com> wrote:

>
>
> > I've ripped out 99% of the structure and code from the uv5r.py that
> > isn't used or necessary. I've also borrowed from other radios as well as
> > cleaned up the code from what I've learn by 'hacking' on the uv5r.py
> > file for the last 13 months.
>
> Ripped out 99% of the non-overlapping code or 99% of the UV5 code entirely?
>
>
What I meant was that if there were 100 lines of code that was not used for
the UV-6, I have only removed 99 lines of it. I haven't removed the code
for adjusting the band limits or the power-on messages yet. Sorry for the
confusion.

I was trying to look over every settings to see if it could be utilized by
the radio. I didn't want to remove it just because the OEM software didn't
have it. If is still did something that the could be utilized by the
user/radio, I wanted to leave it in.

If the UV-6 was going to be supported by a separate uv6.py driver, which
was my goal, then I wanted to be sure it was completely sanitized from any
unnecessary UV-5R, F-11, UV-82 and some left over BJ-UV-55 code in the
structure or anywhere else.

What I was trying to avoid was to add it in and then find out it needed to
be separate like the UV-55.

Jim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20140131/a6144801/attachment-0001.html