[chirp_devel] New model: Polmar DB50M, should be Anytone AT-5888UV clone but...

[Robert Elsinga (PC5E)]

On 4-1-2014 18:19, Dan Smith wrote:
>> If you can tell me how to do that, no problem. I see no "save image"
>> anywhere on the menu ((although it's partially in dutch... which is my
>> OS preffered language).
> File -> Save.

LOL! You tend to overlook things that simple... Attached!

>
>> I also can't edit most configuration settings, but they didn't get
>> touched after reading the radio and writing the config back. So happy
>> camper so far! :)
> Right, that driver has very little decoding of that information. Feel
> free to do that work :)
>


What would be the best way of doing that? I don't mind saving binary 
files and changing one configuration setting at a time to figure out 
what is what. Since the data is probably the same for all 5888UV clones, 
I will gladly do some of that work and help others at the same time. ;)

Can this be done by poking around in the IMG file Chirp saves? If I as 
an example tell you the setting for the Beep is at offset 0xABCD and 
0x00 is Off and 0x01 is On, is that helpfull? Or do I need to capture 
the serial data and deduct something from that?


-- 
Robert Elsinga / PC5E
Dutch Ham Radio operator, CEPT/HAREC Full license
www.pc5e.nl

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Polmar DB-50M.img
Type: application/octet-stream
Size: 32768 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20140104/a1be147c/attachment-0001.img