[chirp_devel] New model: Polmar DB50M, should be Anytone AT-5888UV clone but...

[Dan Smith]

> Oops... must have missed that...  Using that file it reads the radio
> just fine. :)

Cool. Can you try this updated version just to make sure? Also, please
save out a .img of the radio and send it to me so I can put it into the
tests.

If this works, I'll commit and push for tomorrow's daily build.

> I then used the official software to read the radio. Al channels seem to
> be intact and only minor "damage" to the settings, since those are not
> supported. I can live with that for now, but I'm willing to help to
> figure those out too if you want that.

Hmm, there should be no "settings damage" unless you mean some setting
on the memory you touched. The rest of the radio's image should be
unchanged. Do you just mean that some bit got flipped for the channel
you edited? That's expected.

--Dan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: anytone.py
Type: text/x-python
Size: 15843 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20140104/3d5e8d92/attachment-0001.py 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
Url : http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20140104/3d5e8d92/attachment-0001.bin