[chirp_devel] [ft-90] use standard cloning instructions interface #1163

[Dan Smith]

> -        status.msg = "Cloning from radio.\nPut radio into clone mode then\npress SET to send"
> +        status.msg = "Cloning from radio..."

So, my initial plan for this was to have a get_prompts() element for
this extra bit as well, instead of overloading the clone status like this.

Would you be okay snipping this and the matching one below out of this
patch for the time being until we extend get_prompts accordingly? I've
been meaning to figure out where in the UI we should do that. I think
for yaesus we need the pre-download instructions to tell you how to get
it into clone mode, then start the clone thread, and then display
another message that tells you what to push to start the transmission
from the radio (like you did above), right?

Something like prompts.start_download maybe?

I think for the upload case, we can get them to put the radio into clone
and RX mode before they continue and then jump right into sending the image.

Thoughts?

-- 
Dan Smith
www.danplanet.com
KK7DS

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: OpenPGP digital signature
Url : http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20131020/8fac82c4/attachment-0001.bin