[chirp_devel] Improving Chirp LiveCD

[Rick Farina]

I submitted all of the RTSystems cables identifiers to the kernel some
time ago.  Any recent kernel should already have these correctly.

-Zero

On 11/19/2013 10:39 AM, B Giff wrote:
> Team,
> 
> This isn't specifically a Chirp dev question, but you will be my best source of information.
> 
> I am updating the Chirp LiveCD and would like the cable detection to be a lot more robust.  To make this happen, I need info on how Linux detects the chipsets.  If you would please, in Linux, plug your programming cable in, open a terminal window and run:
> 
> dmesg | grep tty
> 
> Find the line for your cable and post it along with the type of cable.
> 
> This is the output for a Prolific PL2303 based cable:
> [  180.547070] usb 2-1.3: pl2303 converter now attached to ttyUSB0
> 
> And this one is for a Silicon Labs CP210x cable:
> [ 1655.773564] usb 3-1: cp210x converter now attached to ttyUSB0
> 
> Those are the only two cables I have info for, so any other cables would be appreciated.
> 
> Thanks in advance.
> 
> Bob
> 
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
>