[chirp_devel] CHIRP programming

[Tom Hayward]

On Fri, Mar 22, 2013 at 1:31 PM, Ran Giladi <ran at bgu.ac.il> wrote:
> Great debug.log!
>
> The cable is attached, the FT1900 comes on (with the A/N LOW pressed) directly with a "CLONE" message on its screen, no S-bar, just music...

Excellent, sounds like everything is working as intended. By hitting
OK in Chirp, you have successfully completed step 4 of the cloning
procedure in the FT-1900 manual. Now complete the rest of the steps.

Tom KD7LXL