[chirp_devel] Need Advice for UV-5R Driver

[Jim Unroe]

>
> Hmm. I just tried and this works here:
>
>   hg qimport float_setting_callback_example.patch
>   hg qpush
>
> Does that not work for you? If you could copy and paste the error(s)
> you get when you try to apply, that'd be good. It's really worth
> spending a bit of time getting that to apply properly, because it was
> fairly intertwined.
>
>  I used the steps from another website. I'll give it a try again with your
steps.


> > There wasn't that much that changed so I
> > was easily able to add the changes manually. I used the
> > settingsedit.py that you provided as-is. The only change I made to
> > settings.py was to bump the precision setting of
> > 'RadioSettingValueFloat(RadioSettingValue): from 4 to 5.
>
> Hmm, I didn't give you a settingsedit.py, but there were changes to
> that in the patch.
>

I mean I used it as patched, not that I actually got the file from you.
Sorry.


>
> Hmm, well I think I need to see your code to really understand all of
> the above. If you could get the patch applied cleanly and then send me
> the "hg diff" of your changes on top of that, I can certainly take a
> look and try to figure out what needs to be done on the "set" side to
> make it take effect.
>
>

I thought I sent a patch along. I'll send it again. Or is there something
else you need?

Jim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20130105/db9f156c/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: workmode.patch
Type: application/octet-stream
Size: 98527 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20130105/db9f156c/attachment-0001.obj