[chirp_devel] Need Advice for UV-5R Driver

[Jim Unroe]

All,

I want to use a section of code something like this. This already works,
but is there a better way to do it? What it need to do is allow the user to
see and edit a VHF or UHF frequency within the allowable frequency range.
It would be nice if it could be displayed and edited similar to a cell in
the spreadsheet view.

        _vfoa = self._memobj.vfoa.freqa
        rs = RadioSetting("vfoa.freqa", "VFO A Frequency",
                          RadioSettingValueInteger(0, 9, _vfoa[0]),
                          RadioSettingValueInteger(0, 9, _vfoa[1]),
                          RadioSettingValueInteger(0, 9, _vfoa[2]),
                          RadioSettingValueInteger(0, 9, _vfoa[3]),
                          RadioSettingValueInteger(0, 9, _vfoa[4]),
                          RadioSettingValueInteger(0, 9, _vfoa[5]),
                          RadioSettingValueInteger(0, 9, _vfoa[6]),
                          RadioSettingValueInteger(0, 9, _vfoa[7]))
        workmode.append(rs)

I also want to limit '_vfoa[0]' to a list of 1, 4 and 5. Any suggestions on
how to do that?

Also, I would want to set another variable, lets call it 'vfoaband', to 0
[meaning VHF] if '_vfoa[0]' = 0 and 1 [meaning UHF] if '_vfoa[0]' = 4 or 5.

Thanks in advance,
Jim Unroe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20130103/bf56a5d3/attachment-0001.html