[chirp_devel] [PATCH 0 of 2 ] Add cross dtcs support - second try

[IZ3GME Marco]

I also noticed:

 > Wouxun KG-UVD1P      BruteForce  FAILED: Field `tmode' is `DTCS', 
expected `Cross'

This seams to be introduced by my patch to the UI ... I will check ...

I'm sure I had run test_all before to send the patches, I probably need 
a better pair of glasses ;)

I will send a third try

73 de IZ3GME Marco

On 25/05/2012 02:40, Dan Smith wrote:
> With the patches applied:
>
>>      Yaesu FT-857/897    CopyAll     FAILED:<25>: Field `dtcs' is `23', expected `32'
>>      Yaesu FT-857/897    BruteForce  FAILED: Field `dtcs' is `23', expected `25'
>>      Yaesu FT-857/897    Edges       PASSED: All tests
>>      Yaesu FT-857/897    Banks      SKIPPED: Banks not supported
>>      Yaesu FT-857/897 (U Detect      PASSED: All tests
>>      Yaesu FT-857/897 (U CopyAll     FAILED:<25>: Field `dtcs' is `23', expected `32'
>>      Yaesu FT-857/897 (U BruteForce  FAILED: Field `dtcs' is `23', expected `25'
>
>
>
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel