[chirp_devel] [PATCH 0 of 1] [ts2000] Adds Kenwood TS-2000 support

[Tom Wilson]

Tom H, I have been playing with the latest daily, and I can't figure out
how to access the TS-2000. Can you give me a hint on how to load and/or use
this module?

Thanks


On Mon, Jun 11, 2012 at 2:22 PM, Tom Wilson <wilsontp at gmail.com> wrote:

> Thanks. I will check it out.
>
> Split is odd. No pun intended. There are two different ways to program
> split, but one of them doesn't work on my unit. The working method sends
> the whole channel twice: once for rx and once for tx. There is one byte
> different to distinguish the two.
>
> Thanks for the update. I'll try to check it out tonight.
>
> ---
> Tom Wilson
> Sent from my Motorola Droid
> On Jun 11, 2012 2:10 PM, "Tom Hayward" <esarfl at gmail.com> wrote:
>
>> I have attempted to write a Kenwood TS-2000 driver based on my reading of
>> the
>> TS-2000 manual, which includes the serial command spec. I don't have a
>> TS-2000.
>> I would appreciate if someone would test this for me, at least try a
>> read. The
>> split stuff is completely unimplemented in this patch. I don't understand
>> how
>> the radio sends the split information, so someone with a radio will have
>> to add
>> that functionality. I expect this patch will have many small bugs. Please
>> test!
>>
>> Pinging Tom Wilson :-)
>>
>>
>> Tom KD7LXL
>> _______________________________________________
>> chirp_devel mailing list
>> chirp_devel at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
>>
>


-- 
Tom Wilson
wilsontp at gmail.com
(619)940-6311
K6ABZ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20120616/39f37ac1/attachment-0001.html