[chirp_devel] [Icom IC-R20] First driver tests

[contact at tuxfriend.fr]

>No. Is there a separate setting for the tuning step on SSB channels
in
>the radio?

Yes there is separate setting, so I have to separate
them into software.

> TMODES = ["", "TSQL", "DTCS", "VSC"]

>"VSC"
isn't a valid tone mode. You'll get an error when you try to download a
channel if you do memory.tmode = "VSC".

It's True. I copied this value
from Icom's software. 

> TUNING_STEPS = [0.01, 0.1, 1.0, 5.0, 6.25,
8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0, 100.0]

>The steps below
5.0 aren't in chirp's global list, and thus you'll get a
>similar error
if you try to set memory.tuning_step=0.01. Is it
>reasonable to ignore
these in get_memory() and set_memory() or is there
>a reason to add
support for them in chirp's core?

The IC-R20 scanner is really
powerful, it can work on all frequencies between 150KHz and 3GHz. Steps
Tuning settings actually exist in this unit and can be used on all
frequencies.

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20120611/94ffbe29/attachment-0001.html