[chirp_devel] Getting started on support for a new radio

[Dan Smith]

> Looks like it may be a timing issue. If I sleep for a few seconds
> between sending the CMD_CLONE_END packet and looking for a confirmation
> packet, the progress indicator on the radio gets to 100% and the display
> goes to "CL END". I still get an error on the console, though:
> 
> chirp.errors.RadioError: Failed to communicate with the radio: Did not
> get clone result from radio.

This isn't a problem. I never finished this bit because it seemed that
some of the radios behaved slightly differently in this regard.

Are you sending the appropriate end frame? Each model has a unique one
for some reason, so you just have to see what it sends on clone out and
replicate it.

> To get the radio out of "CL END", I have to boot it.

Right, that's how all the icoms work.

-- 
Dan Smith
www.danplanet.com
KK7DS



-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: OpenPGP digital signature
Url : http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20120716/277a2ba0/attachment-0001.bin