[chirp_devel] debugging Yaesu VX-8DR transfers

[Hisashi T Fujinaka]

On Thu, 19 Jan 2012, Dan Smith wrote:

>> After a bunch of tries I finally got it to read the memories from the
>> radio (you have to put it in tx mode several times to hit the window
>> correctly) but now I'm not having any luck writing to the radio. I put
>> it in clone "wait" mode, hit the "go" button, and it immediately
>> finishes.
>
> Hmm, might be a sketchy cable.
>
>> So, where's the debug console? Or is there a description of the transfer
>> waveforms so I can look at it on a 'scope (which I don't want to do
>> unless I have to).
>
> It's just TTL serial. You can run it from a console window and see the
> debug output.
>
>> I'm not sure how I should be debugging this, or what code snapshot I
>> should be running, so I though I'd ask here.
>
> Definitely try the latest daily version and/or grab the repository
> directly. The former will be easiest and the latter will let you poke
> with the code a bit:
>
>   http://d-rats.com/hg/chirp.hg

Will do. Thanks!

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte